B003B high Severity

B003B: Second Row Right Frontal Stage 3 Deployment Control (Subfault)

Airbag/SRS system warning light illuminated; potential non‑deployment of right second‑row airbag in a collision

Overview

B003B airbag SRS code second row right frontal stage 3 deployment control

Common Symptoms

  • Airbag/SRS warning light illuminated on dashboard
  • Diagnostic scan shows B003B code stored
  • Potential airbag system disabled or non‑deployment for right second‑row frontal airbag

Most Common Causes

Faulty or damaged wiring harness in right second‑row airbag circuit medium

Wiring damage or harness faults commonly trigger this airbag deployment control fault

Poor electrical connection or corroded connector at airbag or control module medium

Loose, corroded, or bent pins/connectors in airbag circuit can lead to this code

Faulty airbag control module (SDM) medium

Control module malfunction may incorrectly detect a deployment control subfault

Defective right second‑row frontal airbag or sensor low

Less common but possible cause; usually requires professional evaluation

Diagnostic Steps

  1. Connect a professional SRS/OBD‑II scanner and confirm presence of B003B along with any related codes
    Expected: B003B stored and possibly additional SRS codes
    Interpretation: Confirmed SRS fault targeting right second‑row frontal deployment control
  2. Perform a visual inspection of wiring harnesses and connectors for the right second‑row frontal airbag circuit
    Expected: Check for damage, corrosion, disconnected or bent connector pins
    Interpretation: Wiring/connectors in poor condition likely contributing to code
  3. Test harness circuits with multimeter for continuity and resistance within manufacturer specifications
    Expected: Continuity and resistance values within expected range
    Interpretation: Out‑of‑range values indicate wiring or component faults
  4. Check SRS control module (SDM) operation and communication
    Expected: Proper communication and no internal fault flags
    Interpretation: Communication faults or internal errors indicate possible module failure
  5. After repairs, clear codes and perform system test/road test as per SRS protocols
    Expected: Codes do not reappear, SRS system normal
    Interpretation: Successful repair validated

Repair Solutions

Repair or replace damaged wiring/connectors in airbag circuit medium
Estimated Cost: $100 - $400

Cost varies with labor and extent of wiring damage

Replace airbag control module (SDM) if faulty hard
Estimated Cost: $300 - $800

Module replacement may require programming by dealer/tech

Replace right second‑row frontal airbag or related sensor if defective hard
Estimated Cost: $200 - $600

Airbag module parts vary significantly by make/model

Common Misdiagnoses

Avoid these common diagnostic mistakes:

  • Interpreting B003B as a generic engine or fuel code rather than SRS airbag deployment issue

Frequently Asked Questions

What is the definition of the B003B engine code?

When your OBD-II scanner reads B003B, it means: Second Row Right Frontal Stage 3 Deployment Control (Subfault). This code is related to the vehicle's Sensors.

Should I stop driving if I have B003B?

This is a high priority issue. Airbag/SRS system warning light illuminated; potential non‑deployment of right second‑row airbag in a collision

Symptoms associated with DTC B003B

Drivers often report: Airbag/SRS warning light illuminated on dashboard, Diagnostic scan shows B003B code stored, Potential airbag system disabled or non‑deployment for right second‑row frontal airbag when this code is present.

Potential causes for OBDII code B003B

This code is frequently triggered by: Faulty or damaged wiring harness in right second‑row airbag circuit, Poor electrical connection or corroded connector at airbag or control module, Faulty airbag control module (SDM).

What is the price difference for fixing B003B?

It depends on what needs to be fixed. Repair or replace damaged wiring/connectors in airbag circuit repairs are cheaper (~$400), while Replace airbag control module (SDM) if faulty repairs are on the higher end (~$800).

Does code B003B apply to Chevrolet vehicles?

Yes, B003B is a generic code that applies to all OBD-II compliant vehicles, including Ford, Toyota, Honda, Chevrolet, Nissan, Dodge, BMW, and more.

User Comments (0)

Share your experience or ask a question about this code.

Be the first to share your experience with B003B!