B003A high Severity

B003A: Second Row Right Frontal Stage 2 Deployment Control (Subfault)

Airbag system warning light illuminated; potential failure of second row airbag stage 2 deployment

Overview

OBD‑II code B003A refers to a fault in the airbag/supplemental restraint system for the second row right frontal Stage 2 deployment control circuit, indicating potential wiring, sensor, or module issues within the airbag deployment system

Common Symptoms

  • Airbag/SRS warning light illuminated on dashboard
  • Potential inability of second row right frontal airbag to deploy in Stage 2 conditions

Most Common Causes

Faulty connection or wiring in second row right frontal airbag deployment circuit medium

Wiring harness open, shorted, corroded, or high resistance in circuit can trigger the code

Faulty airbag module or sensor for second row right frontal airbag medium

Internal module/sensor malfunction may report a subfault in deployment control

Faulty Sensing and Diagnostic Module (SDM)/airbag control unit low

Control module failure may misinterpret circuit status

Diagnostic Steps

  1. Connect a professional OBD‑II airbag/SRS scanner
    Expected: Confirm B003A presence and check for additional related airbag codes
    Interpretation: Presence of B003A confirms fault in second row right frontal airbag deployment circuit
  2. Visually inspect wiring harness and connectors for the second row right frontal airbag circuit
    Expected: Identify damaged wires, corrosion, loose or disconnected connectors
    Interpretation: Damaged or poor connectivity likely cause of circuit fault
  3. Measure resistance/voltage in the deployment control circuit with a multimeter
    Expected: Resistance within specification and appropriate voltage levels
    Interpretation: Out‑of‑spec values suggest wiring or component fault
  4. Test or replace suspected faulty airbag sensor/module
    Expected: Proper readings or successful deployment test bounds
    Interpretation: Restores correct circuit function if module/sensor was root cause
  5. Clear the code and perform a system test/drive
    Expected: Code should not return if issue resolved
    Interpretation: Confirmation of repair success

Repair Solutions

Repair or replace damaged wiring/connectors in the airbag circuit medium
Estimated Cost: $100 - $300

Wiring repair often resolves electrical path issues triggering B003A

Replace faulty second row right frontal airbag sensor/module hard
Estimated Cost: $400 - $800

Airbag/SRS component replacement requires professional handling due to safety systems

Replace or reflash Sensing and Diagnostic Module (SDM) hard
Estimated Cost: $500 - $1200

Control unit replacement or reprogramming may be needed if SDM is at fault

Common Misdiagnoses

Avoid these common diagnostic mistakes:

  • Generic body code misinterpreted as non‑airbag electrical issue

Frequently Asked Questions

What does a B003A diagnostic trouble code signify?

The B003A code stands for Second Row Right Frontal Stage 2 Deployment Control (Subfault). This generally indicates an issue with the Sensors system.

How serious is the B003A code?

The B003A code is considered high severity. Airbag system warning light illuminated; potential failure of second row airbag stage 2 deployment

What happens when the B003A code is active?

You may experience the following: Airbag/SRS warning light illuminated on dashboard, Potential inability of second row right frontal airbag to deploy in Stage 2 conditions.

What causes the B003A code?

It can be caused by several factors, most notably: Faulty connection or wiring in second row right frontal airbag deployment circuit, Faulty airbag module or sensor for second row right frontal airbag, Faulty Sensing and Diagnostic Module (SDM)/airbag control unit.

Estimated repair costs for different causes of B003A

It depends on what needs to be fixed. Repair or replace damaged wiring/connectors in the airbag circuit repairs are cheaper (~$300), while Replace or reflash Sensing and Diagnostic Module (SDM) repairs are on the higher end (~$1200).

Is B003A a generic or manufacturer-specific code?

This is a universal code. You might see B003A on Ford, Chevrolet, Toyota, Honda, Nissan, or any other OBD-II vehicle.

User Comments (0)

Share your experience or ask a question about this code.

Be the first to share your experience with B003A!