B00E3 medium Severity

B00E3: Second Row Left Seatbelt Pretensioner C Deployment Control (Subfault)

May illuminate airbag warning light; no direct effect on engine performance but impacts occupant safety system

Overview

B00E3 DTC indicates a fault in the second row left seatbelt pretensioner C deployment control circuit, a body restraint system error requiring inspection of wiring and pretensioner unit

Common Symptoms

  • Airbag or SRS warning light illuminated
  • Seatbelt pretensioner circuit fault detected
  • Possible Safety Restraint System diagnostic warning

Most Common Causes

Faulty second row left seatbelt pretensioner C medium

Component failure or internal short can trigger the subfault

Open or shorted wiring/harness to the pretensioner medium

Wiring damage, corrosion, or connector issues common in body wiring

Poor electrical connection at pretensioner control module medium

Loose pins or low voltage triggering control module fault

Diagnostic Steps

  1. Connect professional scan tool and retrieve all SRS/B‑codes
    Expected: B00E3 present with possibly other related SRS codes
    Interpretation: Confirms seatbelt pretensioner B‑code and excludes unrelated faults
  2. Visually inspect wiring and connectors to second row left seatbelt pretensioner
    Expected: No broken wires, corrosion, or loose connectors
    Interpretation: If wiring is compromised, repair and re‑test for code clearance
  3. Measure resistance and continuity of pretensioner circuit with multimeter
    Expected: Resistance within manufacturer specification
    Interpretation: Out‑of‑spec indicates pretensioner or harness issue
  4. Replace suspect pretensioner or repair harness as needed
    Expected: No recurrence of B00E3 after repair and codes cleared
    Interpretation: Successful repair confirms root cause

Repair Solutions

Repair or replace second row left seatbelt pretensioner C medium
Estimated Cost: $200 - $600

Cost varies by vehicle make/model and labor rates

Repair damaged wiring or connectors in pretensioner circuit medium
Estimated Cost: $50 - $250

Depends on accessibility and extent of damage

Common Misdiagnoses

Avoid these common diagnostic mistakes:

  • Hybrid system battery current sensor fault (incorrectly surfaced by generic code sites)
  • Airbag module internal failure unrelated to seatbelt pretensioner

Frequently Asked Questions

What does a B00E3 diagnostic trouble code signify?

Technically, the B00E3 code represents Second Row Left Seatbelt Pretensioner C Deployment Control (Subfault). It usually points to a fault within the Sensors.

Should I stop driving if I have B00E3?

This is a medium priority issue. May illuminate airbag warning light; no direct effect on engine performance but impacts occupant safety system

How do I know if I have code B00E3?

Drivers often report: Airbag or SRS warning light illuminated, Seatbelt pretensioner circuit fault detected, Possible Safety Restraint System diagnostic warning when this code is present.

Potential causes for OBDII code B00E3

This code is frequently triggered by: Faulty second row left seatbelt pretensioner C, Open or shorted wiring/harness to the pretensioner, Poor electrical connection at pretensioner control module.

Is B00E3 expensive to fix?

The cost varies significantly based on the root cause. For example, replacing a Repair damaged wiring or connectors in pretensioner circuit typically costs between $50 and $250, while fixing a Repair or replace second row left seatbelt pretensioner C can range from $200 to $600.

Is the B00E3 code specific to Mercedes?

Yes, B00E3 is a generic code that applies to all OBD-II compliant vehicles, including Ford, Toyota, Honda, Chevrolet, Nissan, Dodge, BMW, and more.

User Comments (0)

Share your experience or ask a question about this code.

Be the first to share your experience with B00E3!