B00CA medium Severity

B00CA: Passenger Seat Occupant Position Sensor D (Subfault)

May illuminate airbag or body system warning; typically does not affect engine performance.

Overview

OBD-II B00CA indicates a fault with the passenger seat occupant position sensor D within the vehicle’s occupant classification/safety restraint system.

Common Symptoms

  • Airbag warning light illuminated
  • Passenger airbag may not enable/disable correctly

Most Common Causes

Faulty passenger seat occupant position sensor D medium

Primary sensor indicated by code.

Open or shorted sensor D wiring/harness medium

Wiring issues are common in body/sensor DTCs.

Poor electrical connection at sensor or module medium

Corrosion or loose connector could lead to intermittent reading.

Faulty airbag control module not reading sensor correctly low

Less common; requires module-level diagnostics.

Diagnostic Steps

  1. Verify the code on a capable OBD-II scanner that can read body safety codes.
    Expected: B00CA code present.
    Interpretation: Confirms code and system.
  2. Visually inspect passenger seat occupant position sensor D connector and wiring harness.
    Expected: No corrosion, breaks, or loose pins.
    Interpretation: Good condition eliminates basic wiring faults.
  3. Measure continuity and resistance on sensor D circuit per vehicle-specific service manual.
    Expected: Values within specification.
    Interpretation: Out-of-spec results indicate sensor or harness issue.
  4. If wiring and sensor checks good, perform airbag control module diagnostic with manufacturer scan tool.
    Expected: Module communication normal.
    Interpretation: Fault within module or sensor if issue persists.

Repair Solutions

Clean and secure sensor D connections easy
Estimated Cost: $10 - $50

Simple connector cleaning and tight seating may resolve code.

Replace passenger seat occupant position sensor D medium
Estimated Cost: $150 - $400

Cost varies by vehicle; part and labor required.

Repair wiring/harness for sensor D medium
Estimated Cost: $50 - $300

Depends on damage extent and accessibility.

Reprogram or replace airbag control module hard
Estimated Cost: $500 - $1200

Module-level fix if sensor and wiring checks pass.

Common Misdiagnoses

Avoid these common diagnostic mistakes:

  • Generic body codes misinterpreted as engine or emission fault
  • Misreading wiring harness issue as sensor failure without testing

Frequently Asked Questions

What does a B00CA diagnostic trouble code signify?

Technically, the B00CA code represents Passenger Seat Occupant Position Sensor D (Subfault). It usually points to a fault within the Sensors.

How serious is the B00CA code?

You should treat B00CA as a medium issue. May illuminate airbag or body system warning; typically does not affect engine performance.

What happens when the B00CA code is active?

Common symptoms include: Airbag warning light illuminated, Passenger airbag may not enable/disable correctly. You might also notice the Check Engine Light is on.

Why is my car throwing a B00CA code?

It can be caused by several factors, most notably: Faulty passenger seat occupant position sensor D, Open or shorted sensor D wiring/harness, Poor electrical connection at sensor or module.

Estimated repair costs for different causes of B00CA

It depends on what needs to be fixed. Clean and secure sensor D connections repairs are cheaper (~$50), while Reprogram or replace airbag control module repairs are on the higher end (~$1200).

What cars are affected by the B00CA code?

This is a universal code. You might see B00CA on Ford, Chevrolet, Toyota, Honda, Nissan, or any other OBD-II vehicle.

User Comments (0)

Share your experience or ask a question about this code.

Be the first to share your experience with B00CA!