B00B2 medium Severity

B00B2: Driver Seat Occupant Classification Sensor C (Subfault)

May illuminate airbag/SRS warning; does not directly affect engine performance but impacts occupant safety system functionality.

Overview

OBD-II code B00B2 indicates a fault in the driver seat occupant classification sensor 'C' within the supplementary restraint system (airbag/occupant detection).

Common Symptoms

  • Airbag or Supplemental Restraint System (SRS) warning light illuminated
  • Driver occupant detection errors
  • Potential disabling of airbag deployment logic

Most Common Causes

Faulty driver seat occupant classification sensor C medium

Sensor failure or internal subfault triggers the code.

Open or short in sensor C wiring/harness medium

Electrical connection issues often cause subfault codes.

Poor electrical connection at sensor medium

Corroded connectors or loose pins can trigger the code.

Faulty Air Bag Control Module (ACM) low

Module misinterpretation of sensor data might cause false fault.

Diagnostic Steps

  1. Verify presence of airbag/SRS warning lamp and scan for B00B2 code
    Expected: Code B00B2 stored in airbag/SRS control module
    Interpretation: Confirms communication of occupant classification sensor C fault.
  2. Inspect wiring harness and connectors for sensor C at driver seat
    Expected: No open, short, or corrosion
    Interpretation: If wiring damage found, repair and retest.
  3. Perform sensor C resistance/continuity test per OEM specification
    Expected: Sensor readings within specification
    Interpretation: Out-of-spec indicates sensor replacement.
  4. Clear code and perform road test/occupant detection test
    Expected: Code does not return
    Interpretation: Confirms repair success; if returns, further module diagnosis required.

Repair Solutions

Repair or replace driver seat occupant classification sensor C medium
Estimated Cost: $150 - $450

Part cost varies by make/model; includes labor to access seat sensor.

Repair wiring harness/connectors medium
Estimated Cost: $50 - $200

Depends on extent of wiring damage.

Replace Air Bag Control Module (if confirmed faulty) hard
Estimated Cost: $400 - $1200

High cost; required only if module confirmed defective.

Common Misdiagnoses

Avoid these common diagnostic mistakes:

  • Confusing B00B2 with general body system codes unrelated to occupant classification
  • Assuming airbag module failure without verifying sensor and wiring first

Frequently Asked Questions

Technical definition of B00B2 OBD-II Code

Technically, the B00B2 code represents Driver Seat Occupant Classification Sensor C (Subfault). It usually points to a fault within the Sensors.

Should I stop driving if I have B00B2?

With a severity level of medium, may illuminate airbag/SRS warning; does not directly affect engine performance but impacts occupant safety system functionality.

What are the symptoms of B00B2?

Common symptoms include: Airbag or Supplemental Restraint System (SRS) warning light illuminated, Driver occupant detection errors, Potential disabling of airbag deployment logic. You might also notice the Check Engine Light is on.

Why is my car throwing a B00B2 code?

This code is frequently triggered by: Faulty driver seat occupant classification sensor C, Open or short in sensor C wiring/harness, Poor electrical connection at sensor.

Is B00B2 expensive to fix?

The cost varies significantly based on the root cause. For example, replacing a Repair wiring harness/connectors typically costs between $50 and $200, while fixing a Replace Air Bag Control Module (if confirmed faulty) can range from $400 to $1200.

Does code B00B2 apply to Ford vehicles?

The B00B2 code is a generic powertrain code, meaning it applies to almost all makes and models, such as Honda, Toyota, VW, Ford, and Chevy.

User Comments (0)

Share your experience or ask a question about this code.

Be the first to share your experience with B00B2!