B0099 medium Severity

B0099: Roll Over Sensor (Subfault)

Primarily affects safety system functionality; may not impact basic vehicle drivability but can disable airbag/rollover protection systems.

Overview

B0099 automotive DTC refers to a Roll Over Sensor Subfault code indicating malfunction in the rollover or airbag sensor circuits impacting vehicle safety systems.

Common Symptoms

  • Airbag warning light illuminated on dashboard
  • Safety system warnings related to restraint control
  • Potential disablement of rollover/airbag deployment capability

Most Common Causes

Faulty rollover sensor or its internal circuitry medium

Sensor internal failure possible especially on specific modules like Jeep ORC

Damaged or corroded wiring/connectors in sensor circuit medium

Common electrical issue causing intermittent or persistent faults

Malfunctioning airbag/occupant restraint control module low

Less common, but control module faults can set B0099

Diagnostic Steps

  1. Connect a professional OBD2 scan tool with SRS capabilities and read B0099 and any associated codes.
    Expected: Code B0099 (and possibly subcodes) present in SRS/airbag module memory.
    Interpretation: Confirms the diagnostic trouble code and indicates active/frozen event.
  2. Visually inspect rollover sensor wiring harness and connectors for damage or corrosion.
    Expected: No breaks, corrosion, or loose connectors.
    Interpretation: Wiring/connectors issues may be cause if defects are found.
  3. Perform rollover sensor functional test or resistance check per manufacturer specs.
    Expected: Sensor values or resistance within specification range.
    Interpretation: Out-of-spec readings indicate sensor failure.
  4. If sensor checks out, test airbag/ORC control module communication and sensor interface.
    Expected: Proper communication and expected live data from sensor input.
    Interpretation: Failure here suggests control module or network issue.

Repair Solutions

Repair or replace damaged wiring/connector issues medium
Estimated Cost: $50 - $300

Cost varies with extent of wiring harness accessibility.

Replace rollover sensor medium
Estimated Cost: $150 - $500

OEM sensor replacement recommended for safety compliance.

Replace occupant restraint control/airbag module hard
Estimated Cost: $400 - $1200

Requires professional calibration and potentially dealer‑level tools.

Common Misdiagnoses

Avoid these common diagnostic mistakes:

  • Mistaking B0099 for generic body code unrelated to safety sensor circuitry

Frequently Asked Questions

Can you explain the meaning of B0099?

Technically, the B0099 code represents Roll Over Sensor (Subfault). It usually points to a fault within the Sensors.

Should I stop driving if I have B0099?

With a severity level of medium, primarily affects safety system functionality; may not impact basic vehicle drivability but can disable airbag/rollover protection systems.

Common signs of the B0099 error code

You may experience the following: Airbag warning light illuminated on dashboard, Safety system warnings related to restraint control, Potential disablement of rollover/airbag deployment capability.

Potential causes for OBDII code B0099

It can be caused by several factors, most notably: Faulty rollover sensor or its internal circuitry, Damaged or corroded wiring/connectors in sensor circuit, Malfunctioning airbag/occupant restraint control module.

How much does it cost to fix B0099?

The cost varies significantly based on the root cause. For example, replacing a Repair or replace damaged wiring/connector issues typically costs between $50 and $300, while fixing a Replace occupant restraint control/airbag module can range from $400 to $1200.

Does code B0099 apply to Toyota vehicles?

Yes, B0099 is a generic code that applies to all OBD-II compliant vehicles, including Ford, Toyota, Honda, Chevrolet, Nissan, Dodge, BMW, and more.

User Comments (0)

Share your experience or ask a question about this code.

Be the first to share your experience with B0099!